Wahoo · Cycling & fitness
Wahoo TICKR X battery
1 × 3V lithium coin cell
How to replace it
| How to open | Coin in back casing depression; turn counter-clockwise to unlock |
|---|---|
| Notes | Same battery replacement process as TICKR. |
| Tools | Coin |
| Access | Tool-free |
Important
- Avoid bitterant coatings per Wahoo
- Wahoo recommends name-brand CR2032 without bitter coating for optimal performance.
Sources
Helpful for this device
Optional tools for opening, testing or charging — separate from the battery answer.
- Coin cell / button cell battery tester
Quick check of CR / LR / SR button and coin cells before fitting
- Fluke 101 Digital Multimeter
Accurate open-circuit voltage and basic electrical checks
- Digital multimeter
Measure open-circuit voltage and general electronics checks
New battery but still not working?
A fresh 1 × CR2032 should restore Wahoo TICKR X if the battery was the problem. Work through the checks below before replacing the device.
- Check the contacts
Avoid bitterant coatings per Wahoo
- Check the battery type
This device needs 1 × CR2032 (lithium). Rechargeable cells are not supported for this device. Same size does not always mean the same battery.
- Confirm the battery itself
For most coin cells, fitting a known-good fresh cell of the correct code is simpler than capacity testing.
- Still not responding?
If a correct, fresh battery installed properly does not restore the device, the fault may be elsewhere — the device may need service or replacement.