Trackers
Tile Pro (2018–2024 replaceable) battery
1 × 3V lithium coin cell
How to replace it
| Compartment | Battery door |
|---|---|
| Orientation | Positive (+) side visible |
| Notes | Test with Find in Tile/Life360 app. In Tile app, dismiss low-battery banner via I've Replaced this Battery. Tile recommends Panasonic, Maxell, or EVE cells. |
| How to open | 2024 Pro: insert paperclip into pinhole above battery door, press, then slide door off. 2018–2022 Pro: apply pressure and carefully slide battery door off. |
| Tools | Paper clip or precision screwdriver |
| Seal / O-ring | Slide door fully sealed — incomplete seal can affect battery connection |
| Access | Simple screwdriver |
| Gasket / O-ring present | Yes |
Important
- Other battery brands may cause inconsistent performance (Tile Support note).
- Generation: Pro 2018/2020/2022/2024 all CR2032 replaceable per Tile Support
Sources
Helpful for this device
Optional tools for opening, testing or charging — separate from the battery answer.
- iFixit Essential Electronics Toolkit
Opening compartments that need precision bits
- Fluke 101 Digital Multimeter
Accurate open-circuit voltage and basic electrical checks
- Digital multimeter
Measure open-circuit voltage and general electronics checks
New battery but still not working?
A fresh 1 × CR2032 should restore Tile Pro (2018–2024 replaceable) if the battery was the problem. Work through the checks below before replacing the device.
- Check orientation
Confirm the cell is seated correctly: Positive (+) side visible
- Check the battery type
This device needs 1 × CR2032 (lithium). Rechargeable cells are not supported for this device. Same size does not always mean the same battery.
- Check known model-specific issues
Slide door fully sealed — incomplete seal can affect battery connection Other battery brands may cause inconsistent performance (Tile Support note). Generation: Pro 2018/2020/2022/2024 all CR2032 replaceable per Tile Support
- Confirm the battery itself
For most coin cells, fitting a known-good fresh cell of the correct code is simpler than capacity testing.
- Still not responding?
If a correct, fresh battery installed properly does not restore the device, the fault may be elsewhere — the device may need service or replacement.