Nikon · Film cameras
Nikon N6000 battery
1 × 6V lithium cell
Nikon’s N6000 archive manual names a 6V lithium pack — Duracell DL223A, Panasonic CR-P2 or equivalent. Not CR2 and not 2CR5.
How to replace it
| Compartment | Battery chamber with lock-release cover |
|---|---|
| How to open | Slide the battery chamber cover lock release, open the cover, insert the 6V lithium pack with +/− as marked inside the cover, push until it locks. |
| Orientation | As marked on the inside of the battery chamber cover |
| Access | Tool-free |
| Notes | If indicators turn off immediately after metering, replace the pack. Keep lithium packs away from children. |
Important
- CRP2 / CR-P2 / DL223A is a 6V photo pack — not CR2 (3V) and not 2CR5.
- Related Nikon AF compact bodies (e.g. AF3 One-Touch) also name CR-P2 / DL223A — verify the body before buying.
- Keep lithium packs away from children.
Sources
Helpful for this device
Optional tools for opening, testing or charging — separate from the battery answer.
- Fluke 101 Digital Multimeter
Accurate open-circuit voltage and basic electrical checks
- Klein Tools MM400 Multimeter
General DC voltage checks including battery terminals
- Digital multimeter
Measure open-circuit voltage and general electronics checks
New battery but still not working?
A fresh 1 × CRP2 should restore Nikon N6000 if the battery was the problem. Work through the checks below before replacing the device.
- Check orientation
Confirm the cell is seated correctly: As marked on the inside of the battery chamber cover
- Check the battery type
This device needs 1 × CRP2 (lithium). Rechargeable cells are not supported for this device. Same size does not always mean the same battery.
- Check known model-specific issues
CRP2 / CR-P2 / DL223A is a 6V photo pack — not CR2 (3V) and not 2CR5. Related Nikon AF compact bodies (e.g. AF3 One-Touch) also name CR-P2 / DL223A — verify the body before buying. Keep lithium packs away from children.
- Confirm the battery itself
Try a known-good fresh cell of the exact code listed above.
- Still not responding?
If a correct, fresh battery installed properly does not restore the device, the fault may be elsewhere — the device may need service or replacement.