Kodak · Digital cameras
Kodak EasyShare CX7525 battery
2 × 1.5V lithium primary cell
The Kodak EasyShare CX7525 takes two AA lithium or Ni-MH cells, Kodak digital AA, a Kodak Ni-MH pack, or one CRV3. Kodak does not recommend alkaline AA for this CX-series body.
Other batteries in this device
How to replace it
| Compartment | Battery door on the bottom of the camera |
|---|---|
| How to open | Slide the battery door; insert two approved AA cells, KAA2HR/Ni-MH pack, or CRV3; close. |
| Orientation | Follow polarity marks |
| Access | Tool-free |
Important
- Takes 2× AA lithium / Ni-MH / Kodak digital AA, a Kodak Ni-MH pack, or 1× CR-V3.
- Kodak does not recommend alkaline AA for this CX-series camera.
Sources
Helpful for this device
Optional tools for opening, testing or charging — separate from the battery answer.
- Panasonic eneloop AA (LSD NiMH)
Replacement AA cells when the device accepts NiMH
- Ansmann Energy Check LCD
Quick household cell check (good / low / replace)
- Battery tester
Quick good / low / dead check for household cells
New battery but still not working?
A fresh 2 × AA should restore Kodak EasyShare CX7525 if the battery was the problem. Work through the checks below before replacing the device.
- Check orientation
Confirm the cell is seated correctly: Follow polarity marks
- Check the battery type
This device needs 2 × AA (lithium_primary). Supported chemistry: lithium_primary, NiMH. Rechargeable cells are only suitable when the manufacturer accepts that chemistry — set battery type in device settings if available. Same size does not always mean the same battery.
- Check known model-specific issues
Takes 2× AA lithium / Ni-MH / Kodak digital AA, a Kodak Ni-MH pack, or 1× CR-V3. Kodak does not recommend alkaline AA for this CX-series camera.
- Confirm the battery itself
If you have a battery tester or multimeter, check the cell. A low open-circuit voltage often means replace; for rechargeable AA/AAA, a capacity test is more informative than voltage alone.
- Still not responding?
If a correct, fresh battery installed properly does not restore the device, the fault may be elsewhere — the device may need service or replacement.