Kodak · Digital cameras
Kodak EasyShare CX6445 battery
1 × 3V lithium primary cell
The Kodak EasyShare CX6445 ships with a CRV3 lithium cell and also accepts 2× AA lithium, 2× Ni-MH, Kodak Max digital AA, or KAA2HR in the same compartment. Kodak does not recommend alkaline AA.
Other batteries in this device
How to replace it
| Compartment | Battery door on the camera body |
|---|---|
| How to open | Slide and lift the battery door; insert CRV3 or two approved AA cells / KAA2HR; close firmly. |
| Orientation | Follow polarity marks / CRV3 orientation diagram |
| Access | Tool-free |
| Notes | Do not use alkaline AA for acceptable life. |
Important
- Native multi-option: 1× CR-V3 OR 2× AA lithium / Ni-MH / Kodak digital AA / KAA2HR.
- Kodak does not recommend or support alkaline AA in this camera.
- CR-V3 is an approved alternate cell in the same compartment — not a proprietary Li-ion pack.
Sources
Helpful for this device
Optional tools for opening, testing or charging — separate from the battery answer.
- Fluke 101 Digital Multimeter
Accurate open-circuit voltage and basic electrical checks
- Klein Tools MM400 Multimeter
General DC voltage checks including battery terminals
- Digital multimeter
Measure open-circuit voltage and general electronics checks
New battery but still not working?
A fresh 1 × CR-V3 should restore Kodak EasyShare CX6445 if the battery was the problem. Work through the checks below before replacing the device.
- Check orientation
Confirm the cell is seated correctly: Follow polarity marks / CRV3 orientation diagram
- Check the battery type
This device needs 1 × CR-V3 (lithium_primary). Supported chemistry: lithium_primary, NiMH. Rechargeable cells are only suitable when the manufacturer accepts that chemistry — set battery type in device settings if available. Same size does not always mean the same battery.
- Check known model-specific issues
Native multi-option: 1× CR-V3 OR 2× AA lithium / Ni-MH / Kodak digital AA / KAA2HR. Kodak does not recommend or support alkaline AA in this camera. CR-V3 is an approved alternate cell in the same compartment — not a proprietary Li-ion pack.
- Confirm the battery itself
Try a known-good fresh cell of the exact code listed above.
- Still not responding?
If a correct, fresh battery installed properly does not restore the device, the fault may be elsewhere — the device may need service or replacement.