Ring · Smart home sensors
Ring Alarm Glass Break Sensor battery
3 × 1.5V alkaline cell
How to replace it
| How to open | Disarm Alarm. Twist off back cover. Replace all three AA alkaline batteries matching +/-. Close cover until lock arrow points to lock symbol. |
|---|---|
| Orientation | Match +/- symbols |
| Low battery indicator | Low battery notification in Ring app; low-battery chirps on some revisions |
| Notes | Replace all three AA cells together; do not mix old/new. |
| Access | Tool-free |
Important
- Uses 3× AA alkaline (not CR123A / CR2032 contact/motion families).
Sources
Helpful for this device
Optional tools for opening, testing or charging — separate from the battery answer.
- Panasonic eneloop AA (LSD NiMH)
Replacement AA cells when the device accepts NiMH
- Ansmann Energy Check LCD
Quick household cell check (good / low / replace)
- Battery tester
Quick good / low / dead check for household cells
New battery but still not working?
A fresh 3 × AA should restore Ring Alarm Glass Break Sensor if the battery was the problem. Work through the checks below before replacing the device.
- Check orientation
Confirm the cell is seated correctly: Match +/- symbols
- Check the contacts
Uses 3× AA alkaline (not CR123A / CR2032 contact/motion families).
- Check the battery type
This device needs 3 × AA (alkaline). Rechargeable cells are only suitable when the manufacturer accepts that chemistry — set battery type in device settings if available. Same size does not always mean the same battery.
- Confirm the battery itself
If you have a battery tester or multimeter, check the cell. A low open-circuit voltage often means replace; for rechargeable AA/AAA, a capacity test is more informative than voltage alone.
- Still not responding?
If a correct, fresh battery installed properly does not restore the device, the fault may be elsewhere — the device may need service or replacement.