Casio · Watches
Casio DW-6900-1V battery
1 × 3V lithium coin cell
How to replace it
| Notes | Case-back service typically required; water resistance should be retested after opening. |
|---|
Important
- Module 3230 is outside the OWS 1977–2009 snapshot — battery from Casio product specification (Pattern A), module from Casio US manual search.
- Current DW-6900-1V uses module 3230; older DW-6900A uses module 1289. Confirm caseback before ordering.
Sources
Helpful for this device
Optional tools for opening, testing or charging — separate from the battery answer.
- Fluke 101 Digital Multimeter
Accurate open-circuit voltage and basic electrical checks
- Klein Tools MM400 Multimeter
General DC voltage checks including battery terminals
- Digital multimeter
Measure open-circuit voltage and general electronics checks
New battery but still not working?
A fresh 1 × CR2016 should restore Casio DW-6900-1V if the battery was the problem. Work through the checks below before replacing the device.
- Check the battery type
This device needs 1 × CR2016 (lithium). Same size does not always mean the same battery.
- Check known model-specific issues
Module 3230 is outside the OWS 1977–2009 snapshot — battery from Casio product specification (Pattern A), module from Casio US manual search. Current DW-6900-1V uses module 3230; older DW-6900A uses module 1289. Confirm caseback before ordering.
- Confirm the battery itself
For most coin cells, fitting a known-good fresh cell of the correct code is simpler than capacity testing.
- Still not responding?
If a correct, fresh battery installed properly does not restore the device, the fault may be elsewhere — the device may need service or replacement.
Need to replace the device?
Casio DW-6900-1V is still sold new. Only buy another if a fresh battery and the checks above did not help.