AC / mini-split remotes
Mitsubishi Electric MRCH2 Wireless Remote Controller battery
2 × 1.5V alkaline cell
How to replace it
| How to open | Open the battery compartment on the wireless controller. Install two AA alkaline batteries matching polarity. Close the cover. |
|---|---|
| Orientation | Match polarity marks |
| Notes | Mitsubishi MHK2 wireless remote control kit sheet: two AA alkaline (included). |
| Access | Tool-free |
Important
- 2× AA alkaline. MHK2 / MRCH2 family — not an IR AAA mini-split handheld.
Sources
Helpful for this device
Optional tools for opening, testing or charging — separate from the battery answer.
- Ansmann Energy Check LCD
Quick household cell check (good / low / replace)
- ZTS Mini-MBT Multi-Battery Tester
More informative state-of-charge style checks across common formats
- Battery tester
Quick good / low / dead check for household cells
New battery but still not working?
A fresh 2 × AA should restore Mitsubishi Electric MRCH2 Wireless Remote Controller if the battery was the problem. Work through the checks below before replacing the device.
- Check orientation
Confirm the cell is seated correctly: Match polarity marks
- Check the battery type
This device needs 2 × AA (alkaline). Supported chemistry: alkaline. Same size does not always mean the same battery.
- Check known model-specific issues
2× AA alkaline. MHK2 / MRCH2 family — not an IR AAA mini-split handheld.
- Confirm the battery itself
If you have a battery tester or multimeter, check the cell. A low open-circuit voltage often means replace; for rechargeable AA/AAA, a capacity test is more informative than voltage alone.
- Still not responding?
If a correct, fresh battery installed properly does not restore the device, the fault may be elsewhere — the device may need service or replacement.