Instant cameras

Fujifilm Instax Mini 11 battery

2 × 1.5V alkaline cell

The Fujifilm Instax Mini 11 takes two AA alkaline batteries (LR6). Fujifilm does not allow manganese cells. This is not a Polaroid 600 / SX-70 film-pack battery — AA cells power the camera; Instax Mini film is separate.

Based on
Fujifilm documentation
Last checked
7 October 2026
Size
14.5 × 50.5 mm
Voltage
1.5 V
Battery powers
Whole device — Powers camera electronics and eject — film pack is separate
Works without battery
No
Replacement notes
Chemistry-sensitive
Rechargeable
Not supported

How to replace it

CompartmentBattery compartment in the camera body (often behind a cover near the film door — confirm on your unit)
How to openOpen the battery cover; insert two AA alkaline cells matching polarity. Close firmly before loading film.
OrientationFollow polarity marks
Low battery indicatorCamera may refuse to eject / flash when batteries are weak
NotesUses Instax Mini film packs (separate from the AA cells). Do not confuse battery door with film door.
AccessTool-free

Important

  • Takes 2× AA alkaline (LR6) only per Fujifilm — manganese cells are not allowed.
  • This is not a Polaroid 600 / SX-70 film-pack battery (Type E). The AA cells power the camera; film is separate.
  • Confirm other Instax Mini variants on their own Fujifilm specs before assuming the same cell count.
  • Keep AA cells and film packs dry; follow Fuji disposal guidance for used packs.

Sources

Need a AA?

Fujifilm Instax Mini 11 uses 2 × AA.

Buy links go to Amazon (Associates where tagged) or other affiliate programmes when available. They never change the battery answer.

Helpful for this device

Optional tools for opening, testing or charging — separate from the battery answer.

Amazon links may earn us a commission. They do not change the battery answer.

Buy links are optional and separate from the battery answer.

New battery but still not working?

A fresh 2 × AA should restore Fujifilm Instax Mini 11 if the battery was the problem. Work through the checks below before replacing the device.

  1. Check orientation

    Confirm the cell is seated correctly: Follow polarity marks

  2. Check the battery type

    This device needs 2 × AA (alkaline). Rechargeable cells are not supported for this device. Same size does not always mean the same battery.

  3. Check known model-specific issues

    Takes 2× AA alkaline (LR6) only per Fujifilm — manganese cells are not allowed. This is not a Polaroid 600 / SX-70 film-pack battery (Type E). The AA cells power the camera; film is separate. Confirm other Instax Mini variants on their own Fujifilm specs before assuming the same cell count.

  4. Confirm the battery itself

    If you have a battery tester or multimeter, check the cell. A low open-circuit voltage often means replace; for rechargeable AA/AAA, a capacity test is more informative than voltage alone.

  5. Still not responding?

    If a correct, fresh battery installed properly does not restore the device, the fault may be elsewhere — the device may need service or replacement.

Replacing the device?

Fujifilm Instax Mini 11 is still sold new. Only consider a replacement if the checks above did not help.

Buy links are separate from the battery answer. Try the checks above before replacing the device.

Need to replace the device?

Fujifilm Instax Mini 11 is still sold new. Only buy another if a fresh battery and the checks above did not help.

Buy links go to Amazon (Associates where tagged) or other affiliate programmes when available. They never change the battery answer.

Other devices using AA

See all →

See all 81 devices using AA →