Bushnell · Golf rangefinders
Bushnell Tour V7 Shift battery
1 × 3V lithium cell
How to replace it
| Notes | Replaceable 3-volt CR2 lithium; one CR2 included in the box (manufacturer product page). |
|---|---|
| Access | Tool-free |
Important
- Thin current-model record: battery from Bushnell Tour V7 Shift product page; detailed door procedure not yet on a dedicated support FAQ.
Sources
Helpful for this device
Optional tools for opening, testing or charging — separate from the battery answer.
- Fluke 101 Digital Multimeter
Accurate open-circuit voltage and basic electrical checks
- Klein Tools MM400 Multimeter
General DC voltage checks including battery terminals
- Digital multimeter
Measure open-circuit voltage and general electronics checks
New battery but still not working?
A fresh 1 × CR2 should restore Bushnell Tour V7 Shift if the battery was the problem. Work through the checks below before replacing the device.
- Check the battery type
This device needs 1 × CR2 (lithium). Rechargeable cells are not supported for this device. Same size does not always mean the same battery.
- Check known model-specific issues
Thin current-model record: battery from Bushnell Tour V7 Shift product page; detailed door procedure not yet on a dedicated support FAQ.
- Confirm the battery itself
For most coin cells, fitting a known-good fresh cell of the correct code is simpler than capacity testing.
- Still not responding?
If a correct, fresh battery installed properly does not restore the device, the fault may be elsewhere — the device may need service or replacement.